123.hp.com/envy6255


123.hp.com/envy6255


123 HP Envy 6255 Printer

Provide Support from 123.hp.com/setup

123 HP Envy6255 Setup and Install

123 HP Envy6255 Windows 10 update

123 HP Envy6255 Wireless Protected Setup

123 HP Envy6255 Driver Download

123 HP Envy6255 Troubleshooting ePrint Service

123 HP Envy6255 Ink Cartridge Problem

Click to Call

123 HP Envy 6255 Setup and Install

HP Envy 6255 Photo printer First time Setup and Install

  • 123 HP Envy 6255 Setup
  • HP Envy 6255 Unboxing and Setting up
  • HP Envy 6255 Ink Cartridge Installation
  • HP Envy 6255 Driver Installation

Wi-Fi Setup – HP Envy 6255 Printer

The Wi-Fi connection is categorized into three type: Wi-Fi Direct, Infrastructure mode and Adhoc. Use the Wi-Fi Setup Wizard to setup up a Wi-Fi connection. Enter the SSID and password of your Wi-Fi network and connect your 123.hp.com/envy6255 printer to the wireless network.

Infrastructure mode setup

  1. The computer and printer communicate through a router and send data to the network interface. The printer, computer and router should be turned on, confirm that your computer and printer are connected to the same wireless network. Unplug any external cable that connects your printer and computer. Search for Utilities and then click Printer Setup & Software Selection. Select Connect a new printer and follow the on-screen instructions to install the software. The printer can be connected to the wireless network using WPS. Press and hold the WPS button on the wireless router and the wireless button on your 123.hp.com/envy6255 printer for a few seconds. The printer will automatically configure the wireless connection.

  2. Need support ? Ring @ Toll Free 1 888-224-4280

Wi-Fi Direct Setup

  1. In Wi-Fi Direct mode, the printer and computer can be connected wirelessly without a router. On your printer’s control panel, touch the Wi-Fi Direct option and copy the Wi-Fi Direct name and password. The option Automatic will provide a simple password and the manual option will provide a secure password. Turn on Wi-Fi on your computer or laptop. Select the Wi-Fi Direct name from the list of networks and enter the password when it is prompted.

  2. Adhoc SetupClick Start and go to the Control panel. Select View network status and tasks option. Click Change adapter settings and double-click the Wireless Network Connection icon. Select Open Network and Sharing Center and then click Set up a new connection or network. Choose Set up a wireless ad-hoc network and then click Next. View the following table and make the necessary changes to Settings and then click Next. Click Close, then double-click the Wireless Network Connection icon.

123 HP Envy 6255 Printer Driver and Manual download

The user manual consists of the setup procedure for installing cartridges, establishing a network connection and loading media. It also consists of the troubleshooting steps for print quality, paper jam and connectivity issues. The driver software is usually provided along with the 123.hp.com/envy6255 printer assembly, but it can also be downloaded from our website. The printer cannot be operated without installing the driver software on your computer.

Downloading the user manual

  1. Go to our website and select Manual download. Enter your printer name or serial number in the search tab. The start-up guide, user guide and network guide will be listed. Select the manual that you want and click download. The manual will be downloaded. Follow the steps in the manual to set up or troubleshoot your 123.hp.com/envy6255 printer.

  2. Need support ? Ring @ Toll Free 1 888-224-4280

Downloading the printer driver

  1. Insert the driver setup CD-ROM in your computer’s CD drive. The CD-ROM folder will open automatically. Double-click the setup file and it will prompt you to run the file, click Run. The installation will begin and there will be a prompt to select the type of installation. Select Easy installation to install all the features and select custom installation to select the features that you want to install on your computer. Click Finish when the installation is completed.

  2. The 123.hp.com/envy6255 printer driver can also be installed from our website. Search for printer drivers and enter your product name or serial number in the search window. The updated driver will be displayed, click download and the driver file will start downloading. Once the download is completed, run the setup file. Follow the installation instructions and complete the setup. If it is prompted to restart the computer, then click Restart. Once the system is restarted, the driver installation will be completed. Open the software that is installed and make necessary changes to the Settings.

123 HP Envy6255 Troubleshooting

Troubleshooting an issue can be split into two parts, diagnosing the problem and deriving with possible solutions. The problem can be diagnosed by checking the LCD panel for an error message and the error light may also flash. Only when we are able to figure out the exact issue, we can come up with appropriate solutions. One common troubleshooting step for all printer issues is to reset the printer. Always run a printer check to determine the exact issue. Make sure that your printer and computer are turned off. Disconnect the interface cable form the printer. Remove all the papers from the tray. Uninstall the cartridges. Use the paper towel and clean the printer. Reinstall the cartridge and load the paper tray. Connect the interface cable and turn on your 123.hp.com/envy6255 printer and computer. Make sure that your computer and printer are connected and print a test page. If the test page doesn’t print, then you will have to follow the other troubleshooting steps. The user manual will consist of the troubleshooting procedure for all possible printer problems. You can also refer our website for online troubleshooting steps. Run HP Scan Doctor which will fix most of the printer issues. If you still face an issue, then service the printer.

Copying Issues
  1. Make sure that the interface cable is connected properly. Confirm that there is no packaging material in ADF when you are using it. When you are using the ADF make sure that there is no material placed on the scanner glass.

  2. If the page copied is blank, then place the document with the print side down and in the automatic document feeder load the document face up. If the document contains both text and graphics at times it won’t be recognized by the OCR software.

  3. Download and run the HP Scan Doctor to fix the copying issues. Open the HP Scan doctor tool and select your printer’s name and then click Next. There will be an option to run the tool, select it and run the tool.

  4. Need support ? Ring @ Toll Free 1 888-224-4280

Printing Issues
  1. In order to prevent paper jam make use of smooth paper that is not wrinkled. Fan the paper stack before loading and check if there is any packaging material left out in the roller area.

  2. Check and clean the Nozzle of the Printhead regularly in order to fix the print quality issues. Run the Nozzle Clean Utility and check the result. If there is a defective nozzle, then replace it.

  3. In order to avoid printing smeared printouts, make use of genuine HP cartridges. When you are refilling the cartridge, make sure that you do not overfill. Clean the copper contacts of the cartridge and cartridge holder regularly.

  4. Open the HP Scan option, on the desktop. Select your printer’s name and then click Fix Printing. The HP Print and Scan Doctor results will be displayed. Check if there is a white checkmark, then the 123.hp.com/envy6255 printer has passed the test.

Scanning Issues
  1. If the feeder is not fed in the ADF then fan the stack of paper and even the edges. Adjust the edge guide and check if the ADF light is glowing.

  2. If the ADF light is not glowing then check the scanner glass. If there is packaging material or any other document on the scanner glass the ADF will not scan.

  3. If the quality of the scanned document is not as expected then clean the scanner glass and the Automatic document feeder paper path. Try to scan the document again.

  4. Position the document in such a way that the horizontal and vertical edges are aligned carefully with the scales along the sides of the document table.

Disclaimer

123hp-setup.com website is an independent service provider aiming to solve technical issues related Printers. The names, brands, images, trademarks and products are used for reference and we do not claim any ownership, right to, affiliation with, or endorsement by, any such third parties unless stated. 123.hp.com/setup

Top Envy Printer Models